3/4" Simpson MCR07512 Rebar Cutter Shake & Shingle Nails Self-Starting Point – Allows for

Self-Starting Point – Allows for easy penetration and reduced risk of wood splitting

Predrilling not required in most applications

(1) APGT6 Gazebo Tie

The LSU series attaches double joists or rafters to headers

Finished with a yellow-zinc coating

3/4" Simpson MCR07512 Rebar Cutter Shake & Shingle Nails Self-Starting Point – Allows forWhen hole placement conflicts with rebar or wire mesh, these bits allow the rebar to be removed so the hole can be drilled to the proper depth. Simpson rebar cutters are separate from shanks. A shank adaptor designed for the rotohammer in use is required (sold separately). Shanks work will all sizes of rebar cutters. The overall length of this rebar cutter is approximately 15".