Autonics Photoelectric Sensor, Photoelectric Type BJP100-BDT-P Band Clamp Ø7mm Light source Red LED(660nm)

Ø7mm Light source Red LED(660nm) Response time Max

Rc (ø25 to ø40) Piping type - standard type cylinder stroke 250 Cylinder stroke 250mm Stroke adjustment unit symbol A Left: A adjustment bolt attachment

60 V DC conforming to EN/IEC 60947-2 Utilisation category Category A conforming to EN 60947-2Category A conforming to IEC 60947-2 Suitability for isolation Yes conforming to EN 60898-1Yes conforming to EN 60947-2Yes conforming to IEC 60898-1Yes conforming to IEC 60947-2 Standards EN 60898-1EN 60947-2IEC 60898-1IEC 60947-2 Quality labels NF Complementary Network frequency 50/60 Hz Magnetic tripping limit 8 x In +/- 20 % [Ics] rated service breaking capacity 50 kA 100 % conforming to EN 60947-2 - 12

CG : Special Clearance

76 lbs Harmonization Code 8482

Autonics Photoelectric Sensor, Photoelectric Type BJP100-BDT-P Band Clamp Ø7mm Light source Red LED(660nm)Sensing type BGS reflective type Sensing distance 10 to 100mm Sensing target Opaque Light source Red LED(660nm) Response time Max. 1. 5ms Power voltage 12 24VDC 10%(ripple P P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON Dark ON(set by switch) Control output PNP open collector Connection type Cable type(3. 5, 2m) Environment_Ambient illumination Sunlight: Max. 10,000lx, Incandescent lamp: